Home > Ask the Networking Experts > Wireless networking with Lisa Phifer Questions & Answers > Will different wireless card link speeds cause network latency?
Ask The Networking Expert: Questions & Answers
EMAIL THIS

Will different wireless card link speeds cause network latency?

Lisa Phifer EXPERT RESPONSE FROM: Lisa Phifer

Pose a Question
Other Networking Categories
Meet all Networking Experts
Become an Expert for this site


Wireless networks news, advice and technical information
Digg This!    StumbleUpon Toolbar StumbleUpon    Bookmark with Delicious Del.icio.us    Add to Google


>
QUESTION POSED ON: 30 June 2008
If three desktop PCs have wireless network cards with different maximum link speeds installed and all three connect to the same access point, will the entire WLAN be forced to slow down? Will all three PCs end up using the lowest link speed?

>
EXPERT RESPONSE
An 802.11 access point (AP) advertises all data rates that it is capable of supporting. For example, an 802.11b AP might advertise 5.5 and 11 Mbps, while an 802.11g AP might advertise 54, 48, 36, 24, 18, 12, 11, 6, and 5.5 Mbps. APs with proprietary "turbo modes" can also support 108 Mbps, while 802.11n APs support many higher data rates.

During connection establishment, data rates are negotiated individually with each client. For example, an 802.11b client that connects to an 802.11g AP may start at 11 Mbps, while an 802.11g client that connects to that same AP may use 54 Mbps. However, these data rates are dynamic -- that is, automatically adjusted as needed to overcome packet loss caused by changes in distance and interference. This is like speaking more slowly and clearly when someone has trouble hearing you.

Clearly, data rates must be adjusted individually with each and every client, since some clients will be closer (and have a stronger signal) than others. However, the mere presence of slower clients can still have an adverse impact on the performance of other clients.

Thus far, we've been talking about unicast data rates applied to traffic sent to and from a single client. But what about broadcast packets sent to/from everyone on the WLAN? Those packets (and only those packets) must be sent at a data rate that everyone can understand. Broadcasts are usually sent at a slower rate like 2 Mbps so that even distant clients will be able to hear them.

APs must also use "protection" mechanisms to prevent collisions between old and new clients. Protection adds overhead -- longer headers and extra control frames -- which keeps the channel busier. Total WLAN throughput therefore drops when protection is turned on. Protection is required when there are older clients in the AP's vicinity, even if those clients do not associate to your AP. If protection were simply turned off, those older clients would just "talk over" newer clients, increasing collision rates and degrading performance even further.


Digg This!    StumbleUpon Toolbar StumbleUpon    Bookmark with Delicious Del.icio.us    Add to Google


RELATED CONTENT
Wireless networking with Lisa Phifer
Which wireless client vendor will keep my network from disconnecting?
Which wireless network transmits business-sensitive data reliably?
What power supply problems do 802.11n wireless networks pose?
Problem connecting to virtual private network (VPN) through Linksys router
Wireless networking problems combining 802.11n and 802.11g APs cause
Why wireless network cards show activity when no one uses the computer
How to implement VLAN switches across wireless LAN (WLAN) links
Are there 802.11n wireless network range extenders to boost my signal?
How does WiMAX compare to other wireless broadband services?
How many more users will 802.11n wireless access points support?

Wireless Network Implementation
Mastering 802.11n: Implementation tips and answers to frequently-asked WLAN questions
LANs vs. WLANs: Which network designs are used for each company size?
Will mixing 802.11g and n APs in the same network cause conflicts?
How each wireless technology differs: Wi-Fi, WiMax and WLANs
Voice over wireless LAN is on the rise: Prepare your networks
Wireless networking problems combining 802.11n and 802.11g APs cause
Wireless LAN tips from Iraq: Networking Joint Base Balad
Wireless LAN vulnerabilities
Are there 802.11n wireless network range extenders to boost my signal?
Accessing printers on a LAN while connected to a WLAN

Wireless LAN Equipment
Which wireless client vendor will keep my network from disconnecting?
What power supply problems do 802.11n wireless networks pose?
LANs vs. WLANs: Which network designs are used for each company size?
Will mixing 802.11g and n APs in the same network cause conflicts?
Wireless LAN acquisition by Juniper might make sense in down economy
Wireless networking problems combining 802.11n and 802.11g APs cause
Why wireless network cards show activity when no one uses the computer
Wireless LAN tips from Iraq: Networking Joint Base Balad
802.11n wireless LAN adoption is booming in colleges and universities
HP ProCurve-Colubris deal signals WLAN market consolidation

RELATED GLOSSARY TERMS
Terms from Whatis.com − the technology online dictionary
802.11a  (SearchNetworking.com)
Asynchronous Pulsed Radiated Incident Light  (SearchNetworking.com)
cognitive radio  (SearchNetworking.com)
direct sequence spread spectrum  (SearchNetworking.com)
frequency-hopping spread spectrum  (SearchNetworking.com)
phase-locked loop  (SearchNetworking.com)
radio frequency  (SearchNetworking.com)
wireless mesh network  (SearchNetworking.com)

RELATED RESOURCES
2020software.com, trial software downloads for accounting software, ERP software, CRM software and business software systems
Search Bitpipe.com for the latest white papers and business webcasts
Whatis.com, the online computer dictionary



Search and Browse the Expert Answer Center
Search and browse more than 25,000 question and answer pairs from more than 250 TechTarget industry experts.
Browse our Expert Advice



Expert networking advice and tips for IT professionals
HomeNewsTopicsITKnowledge ExchangeTipsAsk the ExpertsMultimediaWhite PapersNetworking Product Trials
About Us  |  Contact Us  |  For Advertisers  |  For Business Partners  |  Site Index  |  RSS
SEARCH 
TechTarget provides enterprise IT professionals with the information they need to perform their jobs - from developing strategy, to making cost-effective IT purchase decisions and managing their organizations' IT projects - with its network of technology-specific Web sites, events and magazines.

TechTarget Corporate Web Site  |  Media Kits  |  Reprints  |  Site Map




All Rights Reserved, Copyright 2000 - 2008, TechTarget | Read our Privacy Policy
  TechTarget - The IT Media ROI Experts