The transistor, invented by three scientists at the Bell Laboratories in 1947, rapidly replaced the
vacuum tube as an electronic signal regulator. A transistor regulates
current or
voltage flow and acts as a switch or gate for electronic signals. A transistor consists of three layers of a
semiconductor material, each capable of carrying a current. A semiconductor is a material such as germanium and
silicon that conducts electricity in a "semi-enthusiastic"
way. It's somewhere between a real conductor such as copper and an insulator (like the plastic wrapped around wires).
The semiconductor material is given special properties by a chemical process called doping. The doping results in a material that either adds extra electrons to the material (which is then called N-type for the extra negative charge carriers) or creates "holes" in the material's crystal structure (which is then called P-type because it results in more positive charge carriers). The transistor's three-layer structure contains an N-type semiconductor layer sandwiched between P-type layers (a PNP configuration) or a P-type layer between N-type layers (an NPN configuration).
A small change in the current or voltage at the inner semiconductor layer (which acts as the control electrode) produces a large, rapid change in the current passing through the entire component. The component can thus act as a switch, opening and closing an electronic gate many times per second.
Today's computers use circuitry made with complementary metal oxide semiconductor (CMOS) technology. CMOS uses two complementary transistors per gate (one with N-type material; the other with P-type material). When one transistor is maintaining a logic state, it requires almost no power.
Transistors are the basic elements in integrated circuits (ICs), which consist of very large numbers of transistors interconnected with circuitry and baked into a single silicon microchip or "chip."
Contributor(s): Patrick O'Malley
This was last updated in August 1998
Dig Deeper
-
Backing up to local disk or tape can protect against the accidental destruction of a file but will do nothing to protect you when your facility suffers fire or flooding. Remote backup provides a better solution. This tip looks at two possibilities for remote backup: Choosing an outsourced remote backup service, or using software to do your own backups to an offsite facility.
-
Learn how attackers are using the widespread deployment of low-cost VoIP to leverage phishing attacks.
-
Is the government listening to your VoIP traffic? Can other companies spy on your WAN? It may sound like a paranoid conspiracy theory, but it's not that far out, technologically speaking. In this tip, Tom Lancaster looks at just how exposed your WAN traffic may be.
-
People who read this also read...